Central heating power flush from gas safe registered engineers
Your registered local technician will unleash the full potential of your boiler or radiator
- Ensures even heat distribution
- Optimising the efficiency of your gas boiler or radiator
- Extend your heating system’s lifespan
- Done by Gas Safe registered experts
Get a central heating power flush and optimise your system’s performance in 4 steps
1.Book radiator or boiler power flush session online through the request a service form or over the phone
2.A registered & fully equipped engineer will arrive at your address on a preferred day
3.The specialist will use a power flushing machine to dislodge all sludge and rust
4.Enjoy a better functioning central heating system
How is power flushing of your central heating system done and why do you need one?
When should you hire a power flush specialist
If your radiators are cold at the bottom and hot at the top or some remain completely cold, this is a sign that your heating system needs to be power flushed. Such malfunction is usually caused by excess debris buildup (sludge, rust, and more) inside the radiators or pipes. Generally, the older your heating system is, the higher the chances are that you will have to powerflush it.
The many benefits of power flushing your system
Cleaning your heating system from the contaminants found within will have an instant positive impact on its overall efficiency. At the end of your service, you can expect your boiler or radiators to heat up faster and run more quietly than before. By power flushing your central heating, you will also pay less money for electricity and can enjoy higher water temperatures.
What to expect from our power flush London service
To perform the service, your Gas Safety registered engineer will connect a special machine to your central heating system. The power flushing unit will then release a liquid chemical under low pressure, which will dislodge any sludge and rust that have accumulated in your radiators and boiler and will protect them from future buildup. After 3 to 4 hours, the debris will be gone for good, allowing fresh and clean water to once more freely flow through your heating system.
To perform the service, your Gas Safety registered engineer will connect a special machine to your central heating system. The power flushing unit will then release a liquid chemical under low pressure, which will dislodge any sludge and rust that have accumulated in your radiators and boiler and will protect them from future buildup. After 3 to 4 hours, the debris will be gone for good, allowing fresh and clean water to once more freely flow through your heating system.Types of equipment used to perform the power flushing
Your technician will use a professional Norstrom Proflush machine with a high flow rate. The unit is filled with a powerful descaling and sludge removal product that will deal with the blockages without causing your boiler, radiators, or heating pipes any harm. Upon service completion, the specialist will add a corrosion inhibitor product to the clean water and will troubleshoot your heating system to ensure that it evenly distributes the heat throughout your property.
| Appointments | Monday – Friday | Saturday | Sunday | |
|---|---|---|---|---|
| 8 am – 6 pm | 6 pm – 10 pm | 8 am – 6 pm | 8 am – 6 pm | |
| Standard Price – First Hour | £98 | £113 | £113 | £140 |
| Standard Price – Subsequent Half Hours | £46 | £54 | £54 | £67 |
Minimum appointment time: 1 hour. After the first hour, we will charge on a half-hour basis. Prices are inclusive of all taxes.
If you need an electric cooker, oven, hob or hood repair service, we can help you with this, too.
T&Cs and Minimum Charges apply. When we calculate the price, we also take into consideration the area’s dimensions and the time of the appointment. All prices and deals are valid for areas within M25. Deals cannot be combined with any other deals and promotions. Prices are subject to availability. Congestion charges are excluded (when applicable).
Frequently Asked Questions
Why are the pipes of my heating system clogged?
With time, the water that runs through your boiler, radiators, and heating pipes will start leaving some waste products behind. These include rust, dirt, and other particles, which coagulate together to form a mud-like substance, commonly referred to as “sludge”.
Why are my radiators leaking?
As your radiators grow older, the metal will slowly start to break down. This process is called corrosion and can significantly damage your heating system if left unattended.
How long does it take to power flush my central heating?
The power flushing unit will be connected directly to your central heating system, so you won’t have to drain your radiators, remove them from the walls, or do anything of this sort at all. However, the whole procedure will normally take anywhere between 3 to 4 hours to complete.
Why is my boiler sounding like a boiling kettle?
In a clogged heating system, the water is not being pumped out efficiently. This puts more pressure on your system as it struggles to maintain the normal flow of water, thus producing unpleasant noises. Power flushing your radiators and boiler should take care of the problem.
What can I do if my system suffers regular pump failures?
You need to power flush your system as soon as possible.
Should I carry out power flushes on a regular basis?
This depends on the heating system that you currently own. However, a thorough power flush every 5 to 6 years should keep your boiler, radiator, and pipes in tip-top shape.
Can you handle other radiator services?
Yes, of course! The certified heating engineers are insured, have the know-how and years of expertise to cope with all radiator installation, replacement, and repair tasks safely and efficiently. So, don’t hesitate to contact your reliable radiator expert whenever you need him.